LABEL

FONTENOCE water labels illustrate the main chemical and physical characteristics of the product, together with the elements contained in 1 litre of water, with one of the key attributes being the total absence of arsenic.

Chemical and physical characteristics depend on the type of rock over which the water flows and from which it springs. FONTENOCE water, bottled at an altitude of 1,238 m above sea level, within the Sila National Park, flows naturally over white granite and is enriched with minerals and trace elements which make it one of “the best mineral waters in Italy”, particularly due to the total absence of arsenic. It is also recommended by the Ministry of Health as a product suited for consumption by infants and children (Ministry of Health Decree no. 4123 of 16/12/2013)*.

PHYSICAL AND CHEMICAL PROPERTIES

WATER TEMPERATURE AT THE SOURCE (deep spring water) 7.8°C
FIXED RESIDUE AT 180°C 105 mg/l
ARSENIC ABSENT
NITRITES ABSENT
HYDROGEN IONS AT THE SOURCE Ph 7.65
AMMONIACAL NITROGEN ABSENT
CARBON DIOXIDE AT THE SOURCE 2.50 mg/l
SPECIFIC CONDUCTIVITY AT 20°C 135 μs/cm

«Arsenic is a metal considered a Class 1 carcinogenic element for humans and should never exceed a concentration of 10 μg/l, both for mineral as well as water tap. »

ELEMENTS CONTAINED IN 1 LITRE OF WATER

NITRATE NO3-2.0
SODIUM NA+ 6.1
MAGNESIUM Mg++ 4.9
POTASSIUM K+ 1.7
SULPHATE SO4— 8.2
CHLORIDE CL- 7.3
FLUORIDE F- 0.2
SILICON DIOXIDE SIO2 16.0
BICARBONATE HCO3 83.6
CALCIUM CA++ 16.8

BACTERIOLOGICALLY PURE AT THE SOURCE

Messina 17/11/2014 Prof. Orazio Grillo

The Department of Hygiene and Public Health at the University of Messina periodically analyses FONTENOCE® water and sends the results to the Ministry of Health, which monitors these to ensure there are no grounds for withdrawal of the related certifications.

The full analysis can be requested from: info@ibslifestylewater.com